Lenovo E40 Detecting system information with PC-Doctor, Diagnostics, Interactive Tests, Utility

The options on the test menu are as follows:

Diagnostics		Interactive Tests
v	Run Normal Test	v	Keyboard
v	Run Quick Test	v	Video
v	CPU/Coprocessor	v	Internal Speaker
v	System board	v	Mouse
v	Video Adapter	v	Diskette
v	Serial Ports	v	System Load
v	Fixed Disks	v	Optical Drive Test
v	Diskette Drives	v	Intel WLAN Radio Test
v	Other Devices
v	Wireless LAN
v	Advanced Memory Tests

Note:

v In the Keyboard test in Interactive Tests, the Fn key should be held down for at least 2 seconds; otherwise, it cannot be sensed.

v Video Adapter test supports only the LCD display on the ThinkPad Notebook. If you have an external monitor attached to the computer, detach it before running PC-Doctor for DOS.

v To test Digital Signature Chip, the security chip must be set to Active.

10.Run the applicable function test.

11.Follow the instructions on the screen. If there is a problem, PC-Doctor shows messages describing it.

12.To exit the test, select Quit — Exit Diag. To cancel the test, press Esc.

Note: After running PC-Doctor, check the time and date on the system and reset them if they are incorrect.

Detecting system information with PC-Doctor

PC-Doctor can detect the following system information:

Hardware Info

vSystem Configuration

vMemory Contents

vPhysical Disk Drives

vLogical Disk Drives

vVGA Information

vIDE Drive Info

vPCI Information

vPNPISA Info

vSMBIOS Info

vVESA LCD Info

vHardware Events Log

Utility

vRun External Tests

vSurface Scan Hard Disk

vBenchmark System

vDOS Shell

vTech Support Form

vBattery Rundown

General checkout 49