Product overview
Fn key combinations
The following table shows the function of each combination of Fn with a function key.
Key | Description |
combination |
|
|
|
Fn+F1 | Reserved. |
|
|
Fn+F2 | Reserved. |
|
|
Fn+F3 | Turn off the LCD display, leaving the screen |
| blank. To turn the LCD display on again, press |
| any key or the TrackPoint stick. |
|
|
Fn+F4 | Put the computer in standby mode. To return to |
| normal operation, press the Fn key |
| independently, without pressing a function key. |
| Note: The setting can be changed so that |
| pressing it puts the computer into hibernation |
| mode or even shuts the computer down. |
|
|
Fn+F5 | Open the Wireless Radio Control screen. |
| Note: To use this function, the PM device |
| driver must be installed on the computer. |
|
|
Fn+F6 | Reserved. |
|
|
Fn+F7 | Switch between the computer display and an |
| external monitor (CRT). If an external monitor is |
| attached, computer output is displayed in the |
| following three patterns in turn: |
| v CRT display |
| v Computer display + CRT display |
| v Computer display |
| Note: This setting can be changed so that |
| pressing it starts a presentation scheme directly |
| with no need to start Presentation Director. |
|
|
Fn+F9 | Open the EasyEject Utility screen. |
| Note: This function is supported only in |
| Windows XP and Windows 2000. |
|
|
Fn+F10 | Reserved. |
|
|
Fn+F11 | Reserved. |
|
|
Fn+F12 | Put the computer into hibernation mode. To |
| return to normal operation, press the power |
| button for less than four seconds. |
| Note: To use Fn+F12 for hibernation, the PM |
| device driver must be installed on the computer. |
|
|
Fn+Home | The computer display becomes brighter. |
|
|
Fn+End | The computer display becomes less bright. |
|
|
Fn+Spacebar | Enable the FullScreen Magnifier function. |
|
|