Error messages, Setup Utility

Symptom-to-FRU index

Error messages

Symptom or error	FRU or action, in sequence

Device address	1.	Load “Setup Defaults” in BIOS
conflict.		Setup Utility.
	2.	Recharge the backup battery for one
		hour by connecting the ac adapter to
		the computer and run BIOS Setup
		Utility to verify the configuration.
	3.	Backup battery.
	4.	System board.

Allocation error for	1.	Load “Setup Defaults” in BIOS
device.		Setup Utility.
	2.	Recharge the backup battery for one
		hour by connecting the ac adapter to
		the computer and run BIOS Setup
		Utility to verify the configuration.
	3.	Backup battery.
	4.	System board.

Failing bits: nnnn.	1.	DIMM.
	2.	System board.

Invalid system	1.	DIMM.
configuration data.	2.	System board.

I/O device IRQ	1.	Load “Setup Defaults” in BIOS
conflict.		Setup Utility.
	2.	Recharge the backup battery for one
		hour by connecting the ac adapter to
		the computer and run BIOS Setup
		Utility to verify the configuration.
	3.	Backup battery.
	4.	System board.

Operating system not	1.	Check that the operating system has
found.		no failure and is installed correctly.
	2.	Enter BIOS Setup Utility and see
		whether the hard disk drive and the
		diskette drive are properly
		identified.
	3.	Reseat the hard disk drive.
	4.	Reinstall the operating system.
	5.	Diskette drive.
	6.	Hard disk drive.
	7.	System board.

Hibernation error.	1.	Restore the system configuration to
		what it was before the computer
		entered hibernation mode.
	2.	If memory size has been changed,
		re-create the hibernation file.

Fan error.	Fan.