9
To replace the battery
1Turn off the computer, or enter hibernation mode. Then disconnect
the AC adapter and all cables from the computer.
Note:
If you are using a PC Card, the computer might not be able to enter
hibernation mode. If this happens, turn off the computer.
2Close the computer display, and turn the computer over.
3Unlock the manual battery latch . Holding the spring-loaded battery
latch in the unlocked position , remove the battery pack in the
direction shown by arrow .
1
2
3
3
2
2
1
1
N500_Service Flyer.book Page 9 Thursday, September 25, 2008 1:34 PM