18
Note:
If only one DIMM is used on the computer you are servicing, the card must
be installed in SLOT-0 ( : lower slot), but not in SLOT-1 ( : upper slot).
To make sure that the SO-DIMM is installed correctly, do as follows:
1Turn the computer on.
2Hold F1 key during startup, and the BIOS Setup Utility screen opens.
The “Total Memory” item shows the total amount of memory installed
in your computer.
ab
b
a
N500_Service Flyer.book Page 18 Thursday, September 25, 2008 1:34 PM