Lenovo S10 manual Upgrading and replacing devices

6.If an SO-DIMM is already installed in the memory slot, remove it to make room for the new one by pressing out on the latches
1 on both edges of the socket at the same time, and pulling out the SO-DIMM
2. Be sure to save the old SO-DIMM for future use.

2

1

1

7.With the notched end of the SO-DIMM toward the contact edge side of the socket, firmly insert the SO-DIMM into the socket at an angle of about 20 degrees
1; then pivot it downward until it snaps into place
2.

Chapter 5. Upgrading and replacing devices 77