1100 Palm rest or palm rest with fingerprint reader
For access, remove these FRUs in order:
v“1010 Battery pack” on page 85
v“1030 Solid state drive (SSD) or hard disk drive (HDD)” on page 87
v“1070 Keyboard” on page 98
Note:
In models with the fingerprint reader, the sensor is attached to the palm rest FRU. If the fingerprint reader has any defects, you can replace it by the procedures given in this section, which are the same for a palm rest with or without a fingerprint reader.
Table 19. Removal steps of palm rest or palm rest with fingerprint reader
1 |
|
1 |
|
1 |
|
1 | 2 |
1 |
|
| 1 |
| 1 |
1
Step | Screw (quantity) | Color | Torque |
|
|
|
|
| M2 ⋅ 4 mm, | Black | 0.181 Nm |
|
|
| (1.85 kgfcm) |
|
|
|
|
| M2 ⋅ 6 mm, | Black | 0.181 Nm |
|
|
| (1.85 kgfcm) |
|
|
|
|
106ThinkPad T400s, T410s, and T410si Hardware Maintenance Manual