Table 31. Removal steps of LCD panel
1
Attention: Unplug the LCD cable with holding the left and right edges of the connector with your fingers, and gently pull the connector toward you. DO NOT unplug it with pulling the cable. Applying tension could cause the cable to be damaged or a wire to be broken.
When installing:
vPlace the LCD panel on a soft and clean sheet spread on a flat table, and plug the cable by pushing the left and right edges of the connector little by little with your fingers.
vDO NOT work by lifting the LCD panel.
vDO NOT plug the cable with one hand.
2
138ThinkPad T400s, T410s, and T410si Hardware Maintenance Manual
