Lenovo T61p manual Fn key combinations continued

Table 10. Fn key combinations (continued)

Key combination	Description
Fn+F7	Apply a presentation scheme directly, with no need to start
	Presentation Director.
	To disable this function and use the Fn+F7 key combination for
	switching a display output location, start Presentation Director, and
	change the settings.
	Switch a display output location
	v External monitor (CRT display)
	v	Computer display and external monitor (LCD + CRT display)
	v	Computer display (LCD)

	Notes:
	1. This function is not supported if different desktop images are
	displayed on the computer display and the external monitor (the
	Extend desktop function).
	2. This function does not work while a DVD movie or a video clip is
	playing.
	To enable this function, start Presentation Director, and change the
	Fn+F7 settings.
	Note: Multiple users can log on to a single operating system by using
	different user IDs. Each user needs to change the settings.
Fn+F8	Change the settings of the UltraNav pointing device.
Fn+F9	Open the ThinkPad EasyEject Utility screen. Buttons for the following
	choices are displayed:
	v Eject ThinkPad PC from Dock: This button is displayed only if the
	ThinkPad computer has been attached to a ThinkPad Advanced Dock
	or a ThinkPad Advanced Mini Dock. The computer can be detached
	from the ThinkPad Advanced Dock or the ThinkPad Advanced Mini
	Dock.
	v Eject ThinkPad PC from Mini Dock: This button is displayed only if
	the ThinkPad computer has been attached to a ThinkPad Essential
	Port Replicator and one or more USB devices have been connected to
	the ThinkPad Essential Port Replicator. You can stop and remove all
	the USB devices safely by clicking the button.
	Note: You cannot use this Utility to detach the computer from the
	ThinkPad Essential Port Replicator.
	v Run EasyEject Actions: This button is used to select, stop, or remove
	external devices connected to the ThinkPad computer.
	v Configure EasyEject Actions: Opens the ThinkPad EasyEject Utility
	main window.
	v Fn+F9 Settings: Configures the settings for the Fn+F9 function.
Fn+F10	Reserved.
Fn+F11	Reserved.
Fn+F12	Put the computer into hibernation mode. To return to normal operation,
	press the power button for less than four seconds.
	Note: To use Fn+F12 for hibernation, you must have the ThinkPad PM
	device driver installed on the computer.
Fn+PgUp	Turn the ThinkLight on or off.
	Note: This function is supported only on the ThinkPad computers that
	have the ThinkLight. The on or off status of the ThinkLight is shown
	on the screen for a few seconds when you press Fn+PgUp.
Fn+Home	The computer display becomes brighter.
Fn+End	The computer display becomes dimmer.

56ThinkPad T61 and T61p (14.1-inch) Hardware Maintenance Manual