Lenovo T61p manual Error messages

Error messages

Table 2. Error messages

Symptom or error	FRU or action, in sequence
Device address conflict.	1.	Load “Setup Defaults” in the BIOS
		Setup Utility.
	2.	Backup battery.
	3.	System board.
Allocation error for device.	1.	Load “Setup Defaults” in the BIOS
		Setup Utility.
	2.	Backup battery.
	3.	System board.
Failing bits: nnnn.	1.	DIMM.
	2.	System board.
Invalid system configuration data.	1.	DIMM.
	2.	System board.
I/O device IRQ conflict.	1.	Load “Setup Defaults” in the BIOS
		Setup Utility.
	2.	Backup battery.
	3.	System board.
Hibernation error.	1.	Restore the system configuration to
		what it was before the computer
		entered hibernation mode.
	2.	If memory size has been changed,
		re-create the hibernation file.
Fan error.	1.	Fan.
	2.	Thermal grease.
	3.	System board.
Thermal sensing error.	System board.
Cannot boot from any device.	Check the status of device which you want
	to boot from.
	Device not found.
	1.	The device you want to boot from.
	2.	System board.
	Device Error.
	1.	The device you want to boot from.
	2.	System board.
	No valid operating system.
	1.	Check that the operating system has no
		failure and is installed correctly.
	2.	Reinstall the operation system.
	Excluded from boot order.
	v Enter the BIOS Setup Utility and add the
		device in boot order.

Related service information 43