IdeaPad U260 Hardware Maintenance Manual
1080 Fan assembly and Heat Sink assembly
For access, remove these FRUs in order:
•• “1010 Keyboard” on page 34
•• “1020 Keyboard bezel” on page 35
•• “1030 Battery pack” on page 39
Figure 8. Removal steps of fan assembly and heat sink assembly
Detach the fan connector in the direction shown by arrow 1 and remove five screws 2.
1
2
| 2 | 2 |
2 |
| |
|
| |
|
| 2 |
When installing: Make sure that the fan connector is attached firmly to the system board.
Step | Screw (quantity) | Color | Torque |
|
|
|
|
2 | M1.98 × 3, | White | 1.0~1.5 kgfcm |
|
|
|
|
46
