Lenovo 2394F1U, W530, T530i, 244723U manual Hard disk drive or solid state drive

1

2

1

When installing: Insert the notched end of the memory module into the slot. Press the memory module firmly, and pivot it until it snaps into place. Make sure that it is firmly installed in the slot and does not move easily.

1050 Hard disk drive or solid state drive

For access, remove this FRU:

•“1010 Battery pack” on page 68

Attention:

•Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data.

•Before removing the drive, have the user make a backup copy of all the information on it if possible.

•Never remove the drive while the system is operating or is in suspend mode.

Removal steps of hard disk drive or solid state drive

Note: Loosen the screw

1 , but do not remove it.

72Hardware Maintenance Manual