Lenovo W530, T530i, 2394F1U, 244723U manual Serial Ultrabay Enhanced device or blank bezel

2

When installing: Install the battery pack in the slot, and then make sure that the battery latch is in the locked position.

1020 Serial Ultrabay Enhanced device or blank bezel

For access, remove this FRU:

•“1010 Battery pack” on page 68

Removal steps of Serial Ultrabay Enhanced device or blank bezel

Hold the bay lock latch in the unlocked position 1 and slide the bay eject latch 2 . Then, pull out the Serial Ultrabay Enhanced device or the blank bezel in the direction shown by the arrow 3 .

1

2

3

Note: For RAID models, to remove the second hard disk drive, you need to remove the screw that secures the second hard disk drive adapter first.

Chapter 10. Removing or replacing a FRU 69