Lenovo 309324U, X201S, 311396U manual For Windows 7 and Windows Vista 1. Click Start → Control panel

Windows XP	Windows 7 and Windows Vista
v Power scheme: Energy Star at AC	v Power plan: Energy Star at AC mode
mode	Turn off the display: After 10
Turn off monitor: After 10 minutes	minutes
Turn off hard disks: After 15	Put the computer to sleep: After 25
minutes	Advanced power settings:
System standby: After 25 minutes	- Turn off hard disks: After 15
System hibernates: Never	minutes
	- Hibernate: Never

To awaken your computer from Sleep (Windows 7 and Windows Vista) or System Standby (Windows XP) mode, press Fn key on your keyboard. For more information about these settings, see your Windows Help and Support information system.

The Wake on LAN® function is set to Enable when your Lenovo computer is shipped from the factory, and the setting remains valid even when the computer is in Sleep or Standby mode. If you do not need to have Wake on LAN set to Enable while your computer is in Sleep or Standby mode, you can reduce the power consumption and prolong the time in Sleep or Standby mode, by switching the setting of Wake on LAN for Sleep or Standby mode to Disable. To switch the setting of Wake on LAN, go to Device Manager and do as follows:

For Windows 7 and Windows Vista:

1.Click Start → Control panel.

2.Click Hardware and Sound → Device Manager.

3.In the Device Manager window, expand Network adapters.

4.Right-click your network adapter device, and click Properties.

5.Click the Power Management tab.

6.Clear the Allow this device to wake the computer check box.

7.Click OK.

For Windows XP:

1.Click Start → Control panel.

2.Click Performance and Maintenance → System.

3.Click the Hardware tab, and click Device Manager.

4.In the Device Manager window, expand Network adapters.

5.Right-click your network adapter device, and click Properties.

6.Click the Power Management tab.

Appendix C. Notices 27