Lenovo Z710 manual Removal steps of LCD unit

Lenovo Z710 Hardware Maintenance Manual

1120 LCD unit

For access, remove these FRUs in order:

•“1010 Battery pack” on page 34

•“1020 Dummy card (Optional)” on page 35

•“1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot compartment cover” on page 36

•“1040 Hard disk drive” on page 37

•“1050 Optical drive” on page 40

•“1060 DIMM” on page 41

•“1070 PCI Express Mini Card for wireless LAN/WAN” on page 42

•“1080 Keyboard” on page 44

•“1090 Fan assembly” on page 46

•“1110 System board” on page 50

Figure 12. Removal steps of LCD unit

Release the antenna cables from the cable guides in the direction shown by arrows a. Remove four screws b.

b b

b b

a a

a

Step	Screw (quantity)	Color	Torque
b	M2.5 × 5 mm, flat-head, nylok-coated (4)	Black	1.5 ~ 2.0 kgfcm

When installing:

•Route the antenna cables along the cable guides. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.

54