PLAYING CD TRACKS IN PROGRAMMED ORDER

Programmed Play

You can make a program of up to 16 tracks in the order you want them to be played.

PROGRAM

1. Slide the FUNCTION switch to CD position. Make sure the CD is stopped.

2. Press the PROGRAM button. The letters “ ” and the PROGRAM lamp will flash.

3. Press or to select the tracks you want to program in the order you want.

4.Press the PROGRAM button to confirm.

The letters “ ” will flash and the PROGRAM lamp will be steady on.

5.Repeat steps 3 and 4. You can program up to 16 tracks.

6. Press to start programmed play. During the programmed play, the selected track numbers will display in the programmed order.

The PLAY and PROGRAM lamps will be steady on.

PLAY/

PA U S E

PROGRAM REPEAT

PLAY/

PA U S E

PROGRAM

REPEAT

To change the current program

Just create a new program following the Programming procedure.

To cancel Programmed Play

Press the STOP button twice or slide the FUNCTION switch to TAPE position (POWER OFF).

14IB-CD103(SY)-WM-E-053002

Page 15
Image 15
Lenoxx Electronics BP-103, CD-103 operating instructions Playing CD Tracks in Programmed Order