Lenoxx Electronics CD-162 Trouble Shooting, General CD player Tape player Radio

TROUBLE SHOOTING

General

CD player

Tape player Radio

	Problem	Remedy
		• Connect the AC power cord to a wall
The power is not on.		outlet securely.
		• Make sure the batteries are inserted
		correctly and they are fresh.
		• Make sure the FUNCTION switch is at the
There is no sound.		right position as you want.
		• Adjust the volume.
		• Unplug the headphones when listening
		through speakers.
VFD display does not light		• You may use battery power, the VFD
up.		display only light up when using AC power.
“	” appears in the display	• Insert the CD with the label side up.
even when a CD is in place.
		• Make sure that the CD compartment is
		closed.
		• Place the CD with the label side up.
CD does not play.		• Clean the CD.
		• Take out the CD and leave the CD DOOR
		open for about an hour to dry moisture
		condensation.
		• Make sure the FUNCTION switch is at CD
		position.
		• Clean the CD, or replace it if the CD is
		badly damaged.
The sound drops out.		• Place the player in a location free from
		vibration.
		• Check if your batteries are fresh.
The sound is weak, or has		• Replace all the batteries with new ones if
poor quality.		they are weak, or bring the set near a
		window, or rotate the set.
The RECORD button does not		• Make sure the safety tab on the cassette
function/The tape does not		is in place (see page 21).
		• Make sure the FUNCTION switch is at TAPE
play.
		position.
The tape does not erase		• Clean the erasing head (see page 22).
completely.		• Replace all the batteries with new ones if
		they are weak.
		• Make sure the tape is inserted properly.
The tape does not record.		• Make sure the safety tab of the cassette
		is in place.
The	sound is weak/The	• Clean the heads, pinch roller and capstan
sound quality is poor.		(see page 22).
Cassette PLAY button pops		• The tape has reached its end. Remove
up.		it, flip to the other side and re-insert.

23IB-CD162(SLIM)-TA-V1