ATTACHING THE SPEAKERS
1.Bring one of the speaker to the right side of the set.
2. Align the rails of the speaker box with the main set as shown in FIG.1.
FIG.1
3. When speaker align with the rails, push the speaker into the rails as shown in FIG. 2.
4. Repeat above steps 1 to 3 for the left side.
FIG.2
5.Carefully unwind the speaker wire from behind each speaker box and plug the right plug into Speaker Jack R, also plug the left plug into Speaker Jack L (as shown in FIG. 3). Wrap the remaining wire behind each speaker box.
LOCK TAB
FIG.3
NOTE: This set can be used with speaker boxes attached to the cabinet or separated, just make sure both speaker plugs are plugged into the jacks.
To remove the speakers, press the lock tab and push the speakers out of the rails.
