CHOOSING THE POWER SOURCES
You can use AC power or batteries as a power source.
To a wall outlet
TIP
If the plug of the AC power cord does not match your outlet, do not force it.
Reverse it and try again. The plugs are polarized and only fit one way into the wall outlet and back of the set.
TIP
Replace the batteries when the POWER/BATT. INDICATOR gets dim or when the set stops operating. Replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the player and remember to check the Battery Safety Instructions on Page 3.
NOTE: One blade of plug and outlet is wider.
AC SOCKET
1. Connecting the AC power cord
Insert one end of the supplied AC power cord (located in the battery compartment) into the socket located at the back of the set, and the other end to the wall outlet.
2. Using battery power
Insert 8 size “D” batteries (not supplied) into the battery compartment.
To use the player on batteries, disconnect the AC power cord from the player.
U P P E R
L O W E R
VFD DISPLAY
The VFD display only light up when using AC power.
