AMPLIFIER
General
1Press the POWER button on the front panel of the main unit to turn the main
power on, press SOURCE or MASTER VOLUME buttons on the main unit, or any button on the REMOTE control to turn the set on. Make sure the POWER/STANDBY indicator is lit in green.
NOTE: The POWER/STANDBY indicator has 2 colors: red and green (green is on, red is standby). When the set is off (standby), pressing the SOURCE or MASTER VOLUME buttons on the main unit, or pressing any button on the REMOTE CONTROL will turn the set on. The indicator will become green. Also this indicator will flash confirming that you pressed any button on the REMOTE CONTROL.
2 Press the SOURCE button on the front panel of the main unit repeatedly to select one of the input sources, or press the individual COAXIAL, OPTICAL, GAME, TV/VCR or AUX buttons on the REMOTE to select the audio input source. The corresponding indicator will light.
3 For volume adjustments, press each individual speaker’s volume control buttons:
+raises the volume 
lowers the volume
Follow this step to adjust the other speakers as well. Or you may press the MASTER VOLUME buttons to raise or lower all speakers’ volumes at the same time.
For details, see page 21.
4To select the listening mode, press the SURROUND or STEREO button on the REMOTE CONTROL.
NOTE: This set will decode and automatically play back whatever sound system was recorded on the DVD or audio disc. For a Dolby Digital 5.1 channel audio source, the sound will come out of all 5 speakers plus the subwoofer; for a Dolby Digital 2.1 channel or other stereo audio source, the sound will only come out of the 2 front speakers plus the subwoofer. To manually change a stereo (2 channel) audio to Dolby Pro Logic, press the SURROUND button. The sound will come out of all 5 speakers plus the subwoofer.
5For different preset equalizers (tone selections) and sound effects, press the EQ, NIGHT, DELAY TIME buttons on the REMOTE to select the tones (frequency response) you like best (see details on page 24).
6 To momentarily shut off the sound, press the MUTE button. The red MUTE indicator will light. Press the MUTE button again or press the MASTER VOLUME buttons to restore the sound.
20
