Congratulations for purchasing a Lenoxx Sound telephone. Some of the features of the
LAST NUMBER REDIAL - Useful if line is busy.
DESK OR WALL MOUNTABLE - No special hardware needed. TONE/PULSE SWITCHABLE - Select the desired dialing mode.
ADJUSTABLE HANDSET VOLUME CONTROL - Adjusts and raises volume of receiver.
FLASH BUTTON - For alternate pay service such as call waiting or getting a new dial tone quickly.
FULLY MODULAR JACKS - For easy
REVERSIBLE HANDSET HOLDER FOR WALL USE - Holds Handset in
YOUR SALES RECEIPT
You will need your sales receipt should you ever need warranty service. You should also save the packing material if you want to move or ship this phone.
INSTALLATION INSTRUCTIONS
INSTALLATION | TELEPHONE BASE | HANDSET |
| ||
|
| |
STRAIGHT TELEPHONE CORD | COILED HANDSET CORD | |
To Telephone Jack | ||
1.Insert the modular plugs of the Coiled Handset Cord into the jack of the Telephone Handset and into the jack on the SIDE of the Telephone Base (either end can be plugged in).
2.Insert the modular plugs of the Straight (not coiled) cord into the modular jack at the TOP of the Telephone Base and into the Telephone Jack. (either end can be plugged in ).
NOTE: To insure your phone is properly connected, lift Handset and listen for dial tone.
RINGER ON/OFF SWITCH
ON - Normal setting, rings on incoming calls.
OFF - The ringer does not sound, for undisturbed privacy.
NOTE: If your Ringer Switch is in OFF position, only THIS phone will not ring, other phones in your home on the same line will ring.
TONE/PULSE SWITCH
TONE - The phone will operate using tone dialing. PULSE - The phone will dial using rotary dial type pulse.
NOTE: Even when your phone is set to pulse service, this phone can dial tones for access to services that require tone sounds like computer systems or call
directors. Just press the Tone Button 
after dialing in pulse and your
buttons can now be used for tone signaling for this call only. After you hang up, the phone resets itself to pulse dialing.
3 |
| |
|
