Manuals / LevelOne / Computer Equipment / Switch

LevelOne GSW-2476 user manual 5-30

Models: GSW-2476

1 108

Download 108 pages 23.03 Kb

Page 74

CONFIGURING THE SWITCH

For QinQ operation, a customer port should be set to VLAN unaware and a provider port (trunk port) should be set to VLAN aware.

•QinQ – A QinQ enabled port will accept packets up to 1526 bytes in length, which means double tag header frames can be accepted.

QinQ should be enabled for provider ports but not for customer ports. Note: QinQ “customer” ports are those ports that are connected to

normal VLAN aware switches in the customer’s network. QinQ “network” ports are those which are connected to the service provider's network. To tunnel packets through a service provider’s metro network, QinQ needs to be enabled on the network port.

•Packet Type – Sets the interface to accept all frame types, including tagged or untagged frames, or only tagged frames. When set to receive all frame types, any received frames that are untagged are assigned to the default VLAN. PCs should be connected to ports with Packet Type set to “All.” PCs cannot, in general, send or receive tagged packets. Switches should be connected to each other with Packet Type set to “Tagged.” If the Packet Type is set to “All,” the port can accept incoming tagged and untagged packets. Untagged packets will be associated with the VLAN identified by the PVID. Tagged packets will be dropped unless the port is a member of the VLAN identified by the VLAN tag in the packet. Outgoing packets will be tagged unless the packet’s VLAN ID is the same as the PVID. If the Packet Type is set to “Tagged,” the port will drop untagged packets and will only send and receive tagged packets. Tagged packets will be dropped unless the port is a member of the VLAN identified by the VLAN tag in the packet. The PVID has no effect in this case.(Option: All, Tagged; Default: All)

•PVID – VLAN ID assigned to untagged frames received on the interface. The PVID (Port VLAN ID) is the VLAN ID that is associated with untagged, ingress packets. It is not possible to remove a port from VLAN 1 unless its PVID has been changed to something other than 1. The PVID has no effect on ports that have Packet Type set to Tagged. (Default: 1)

5-30

Image 74

LevelOne GSW-2476 user manual 5-30

Contents

GSW-2476 24-Port Gigabit w/ 4-Port SFP Web Smart SwitchLevelOne User ManualPage COMPLIANCES FCC - Class ACE Mark Declaration of Conformance for EMI and Safety EEC COMPLIANCESWarning Fiber Optic Port Safety Safety CompliancePower Cord Safety fiber cable ends when they are powered onPower Cord Set COMPLIANCESEnd of Product Life Span Warnings and Cautionary MessagesEnvironmental Statement Manufacturing MaterialsAudience viiiPurpose Related Publications1 About GSW-2476 TABLE OF CONTENTS3 Installing the Switch 2 Network PlanningMaking Network Connections Configuring the SwitchTABLE OF CONTENTS Glossary Index TABLE OF CONTENTS TABLES xiiiFIGURES FIGURES FIGURES Port Status Indicators CHAPTEROverview Power SocketNetwork Management Options ABOUT GSW-2476Switch Architecture 10/100/1000BASE-T Ports Description of HardwarePort and Power Status LEDs SFP SlotsABOUT GSW-2476 4-Port SFP Web Smart SwitchFigure 1-3 Port LEDs and Power LED Figure 1-4 Power Supply Socket Features and BenefitsPower Supply Socket ConnectivityPerformance ABOUT GSW-2476Expandability ManagementIntroduction to Switching CHAPTER NETWORK PLANNINGFigure 2-1 Collapsed Backbone Application ExamplesCollapsed Backbone Central Wiring Closet Figure 2-2 Central Wiring ClosetRemote Connections with Fiber Cable Figure 2-3 Remote Connections with Fiber CableMaking VLAN Connections Figure 2-4 Making VLAN ConnectionsApplication Notes Selecting a Site CHAPTER 3 INSTALLING THE SWITCHEthernet Cabling Figure 3-1 RJ-45 ConnectionsPackage Contents Equipment ChecklistMounting Optional Rack-Mounting EquipmentTemperature Since the temperature within a rack assembly may be higher than the ambient room temperature, check that the rack-environment temperature is within the specified operating temperature range see page C-2 Figure 3-3 Installing the Switch in a Rack Figure 3-2 Attaching the BracketsDesktop or Shelf Mounting Figure 3-4 Attaching the Adhesive FeetInstalling an SFP Transceiver Figure 3-5 Inserting an SFP Transceiver into a SlotConnecting to a Power Source Figure 3-6 Power SocketTwisted-Pair Devices Connecting Network DevicesCHAPTER MAKING NETWORK CONNECTIONS Connecting to PCs, Servers, Hubs and Switches Figure 4-1 Making Twisted-Pair ConnectionsNetwork Wiring Connections Figure 4-2 Wiring Closet ConnectionsFiber Optic SFP Devices Figure 4-3 Making Connections to SFP Transceivers FIBER OPTIC SFP DEVICES1000 Mbps Gigabit Ethernet Collision Domain Connectivity Rules1000BASE-T Cable Requirements Table 4-1 Maximum 1000BASE-T Gigabit Ethernet Cable LengthTable 4-3 Maximum 1000BASE-LX Fiber Optic Cable Length 100 Mbps Fast Ethernet Collision Domain10 Mbps Ethernet Collision Domain Table 4-4 Maximum 1000BASE-ZX Fiber Optic Cable LengthCable Labeling and Connection Records Using the Web Interface CHAPTER 5 CONFIGURING THE SWITCHFigure 5-1 Home Page Navigating the Web Browser InterfaceHome Page Figure 5-2 Front Panel Indicators Configuration OptionsTable 5-1 Web Page Configuration Buttons Panel DisplayTable 5-2 Switch Main Menu Main MenuTable 5-2 Switch Main Menu Continued Sets the priority of packets forwarded throughSystem Information Web ConfigurationField Attributes Address InformationVLAN Inoformation WEB CONFIGURATIONTrunk Information Web - Click STATUS, Overview Figure 5-3 Switch InformationCONFIGURING THE SWITCH Parameter Showing Port StatisticsTable 5-3 Port Statistics DescriptionRMON Statistics 5-10Table 5-3 Port Statistics Continued Table 5-3 Port Statistics Continued 5-11WEB CONFIGURATION Table 5-3 Port Statistics Continued 5-12received and transmitted where the number of octets received and transmitted that were 64 octets in lengthDisplaying System Name 5-13WEB CONFIGURATION Field AttributesField Attributes 5-14Setting the Switch’s IP Address Figure 5-5 System NameManual Configuration 5-15Configuring the Logon Password Figure 5-6 LAN SettingsReset to Factory Defaults 5-16Figure 5-7 Password Settings ToolsFigure 5-9 Upgrade Firmware 5-17Figure 5-8 Reset to Factory Defaults Upgrade Firmware Figure 5-10 Restart Switch Set boot Image 5-18Upload/Download Configuration Figure 5-11 Set boot ImageFigure 5-12 Restart Switch 5-19Restart Switch Static MAC Address ConfigurationFigure 5-13 Static MAC Address Configuration 5-20Counter Config Figure 5-14 Counter Configuration 5-21Port Configuration Field AttributesFigure 5-15 Port Configuration 5-22Web - Click PORTS, Settings CONFIGURING THE SWITCHField Attributes 5-23Storm Control Figure 5-16 Port Broadcast Control 5-24Port Mirroring Field AttributesFigure 5-17 Port Mirroring 5-25Cable Diagnostic Field AttributesTrunks Membership 5-26Figure 5-18 Cable Diagnostics Field AttributesFigure 5-19 Trunk Membership 5-27Trunk Configuration Field AttributesFigure 5-20 Trunk Configuration 5-28VLAN Settings Introduction to VLANsField Attributes 5-29The switch management interface is on VLAN 1 this cannot be changed 5-30 For QinQ operation, a customer port should be set to VLAN unaware and a provider port trunk port should be set to VLAN aware5-31 Figure 5-21 VLAN Settings VLAN MemembershipCONFIGURING THE SWITCH 5-32Figure 5-22 802.1Q VLAN Configuration Figure 5-23 802.1Q VLAN Group QoS Disabled 5-33QOS Settings 802.1pSecurity 5-34Figure 5-24 QoS Settings 5-35 Figure 5-25 Management Access Filter ConfigurationIGMP Snooping Configuration 5-36Settings Field Attributes IGMP Snooping VLAN ConfigurationFigure 5-26 IGMP Snooping Configuration IGMP Status 5-37Web - Click IGMP Snoop, Settings Field AttributesWeb - Click IGMP Snoop, Status 5-38CONFIGURING THE SWITCH Figure 5-27 IGMP Snoop StatusTable A-1 Troubleshooting Chart APPENDIX A TROUBLESHOOTINGDiagnosing Switch Indicators In-Band Access Power and Cooling ProblemsInstallation Reset the Switch TROUBLESHOOTING Figure B-1 RJ-45 Connector Pin Numbers APPENDIX B CABLESTwisted-Pair Cable and Pin Assignments 10BASE-T/100BASE-TX Pin Assignments Table B-1 10/100BASE-TX MDI and MDI-X Port PinoutsStraight-Through Wiring Figure B-2 Straight-through WiringCrossover Wiring Figure B-3 Crossover WiringTable B-2 1000BASE-T MDI and MDI-X Port Pinouts Cable Testing for Existing Category 5 Cable1000BASE-T Pin Assignments Fiber Standards Adjusting Existing Category 5 Cabling to Run 1000BASE-TSwitching Database APPENDIX C SPECIFICATIONSPhysical Characteristics WeightPower Supply Switch FeaturesManagement Features Power ConsumptionSoftware Loading StandardsCompliances CE Mark EmissionsSPECIFICATIONS 10BASE-T GLOSSARYGlossary-1 100BASE-TXCollision Glossary-2Bandwidth Collision DomainGigabit Ethernet Glossary-3Full Duplex IEEELayer Glossary-4Media Access Control MAC Link SegmentRJ-45 Connector Glossary-5Redundant Power Supply RPS Switched PortsGlossary-6 GLOSSARYIndex-1 INDEXNumerics Index-2 Index-3 INDEXIndex-4 INDEXPage GSW-2476 E082006-JC-R01 149100011100H