LevelOne GSW-2476 manual Installing an SFP Transceiver, Inserting an SFP Transceiver into a Slot

INSTALLING AN SFP TRANSCEIVER

Installing an SFP Transceiver

7 8

9 10 11 12

19 20

21 22 23 24

Shared	SFP
	Port
21
22
	23

24

Figure 3-5 Inserting an SFP Transceiver into a Slot

The switch supports the following optional transceivers:

•1000BASE-SX (GVT-0300)

•1000BASE-LX (GVT-0301)

•1000BASE-ZX (GVT-0302)

To install an SFP transceiver, do the following:

1.Consider network and cabling requirements to select an appropriate transceiver type. Refer to “Connectivity Rules” on page 4-6.

2.Insert the transceiver with the optical connector facing outward and the slot connector facing down. Note that SFP transceivers are keyed so they can only be installed in one orientation.

3.Slide the transceiver into the slot until it clicks into place.

Note: SFP transceivers are hot-swappable. The switch does not need to be powered off before installing or removing a transceiver. However, always first disconnect the network cable before removing a transceiver.

Note: SFP transceivers are not provided in the switch package.

3-7