LevelOne GSW-2496 user manual Set IP Address, Subnet Mask and Default Gateway IP Address

l

•Set IP Address, Subnet Mask and Default Gateway IP Address

Please refer to Fig. 2-7 CLI Management for details about LevelOne’s setting. They are default setting of IP address. You can first either configure your PC IP address or change IP address of the switch, next to change the IP address of default gateway and subnet mask.

For example, your network address is 10.1.1.0, and subnet mask is 255.255.255.0. You can change the switch’s default IP address 192.168.1.1 to

10.1.1.1and set the subnet mask to be 255.255.255.0. Then, choose your default gateway, may be it is 10.1.1.254.

Default Value		GSW-2496		Your Network Setting
IP Address	192.168.1.1		10.1.1.1
Subnet	255.255.255.0		255.255.255.0
Default Gateway	192.168.1.254		10.1.1.254

Table 2-3

After completing these settings in the switch, it will reboot to have the configuration taken effect. After this step, you can operate the management through the network, no matter it is from a web browser or Network Management System (NMS).

L2 Managed Switch – GSW-2496

Login: admin

Password:

GSW-2496#

Fig. 2-8 the Login Screen for CLI

17