Card) or switch and hub.
Ethernet Ports (Port 9~16):
These ports support network speeds of either 10Mbps or 100Mbps, and can operate in half- and full- duplex transfer modes. These ports also supports automatic MDI/MDIX crossover detection function gives true “plug and play” capability, just need to
Note: When the port was set to “Forced Mode”, the Auto MDI/MDIX will be disabled.
Rear Panel
Figure 4. Rear panel of the Switch
AC Power Connector:
This is a
Reset:
The Reset button is to reset all the setting back to the factory default.
Note: Be sure that you recorded the setting of your device, else all the setting will be erased when pressing the “Reset” button.
12
