Figure 26.
Press “Refresh” button to refresh the status of the PoE.
Press click on the ID parameter to enter to the selected port to configure the PoE settings, select enable to activate the PoE function from port 1 to port 8, and disable to deactivate the PoE function. Click “Apply” button to save the setting.
Figure 27.
Device Status
Click on the “Status” to present the device status on this screen, it will show the System Status, Port Status, VLAN Status, Trunk Status, Mirror Status, QoS Status and PoE Status.
Press “Refresh” when you need to renew the posted information.
31
