![](/images/new-backgrounds/1189088/18908851x1.webp)
how to configure the Switch to enable its smart functions including:
Port Setting (Speed/Disable, Flow Control and Port Bandwidth Rate Ingress/Egress)
VLAN Setting (802.1Q VLAN) Trunking
Port Mirroring
QoS Setting
PoE Setting System Setting
Device status and Statistic
Login
Before you configure this device, note that when the Web Smart Switch is configured through an Ethernet connection, make sure the manager PC must be set on same the IP network. For example, when the default network address of the default IP address of the Web Smart Switch is 192.168.0.1, then the manager PC should be set at 192.168.0.x (where x is a number between 2 and 254), and the default subnet mask is 255.255.255.0.
Open Internet Explorer 5.0 or above Web browser.
Enter IP address http://192.168.0.1 (the
Figure 12.
22