LAN Model | The default setting is NAT mode for IP |
| Phone, and this enables the embedded |
| NAT router between the LAN port and PC |
| port. You may change to Bridge Mode if |
| you need NOT use the embedded NAT |
| router. When setting to Bridge Mode, the |
| WAN and the LAN ports will be bridged. |
IP Type | There are three selections for WAN: Fixed |
| IP, DHCP Client, and PPPoE modes. This |
| WAN setting is for the LAN port when set |
| in NAT mode. The WAN default is at |
| DHCP Client Mode. |
| For Fix IP Mode, please make sure the IP |
| address. Net Mask, Gateway, and DNS |
| settings are suitable in your current |
| network environment. |
| For PPPoE Mode, you have to enter |
| correct username and password to get the |
| IP address from your Internet Service |
| Provider. |
41
