Wireless Broadband router User Guide
Connection Log
Connection Log • The Connection Log shows status messages relating to
the existing connection.
• The "Clear Log" button will restart the Log, while the Re-
fresh button will update the messages shown on screen.
Buttons
Connect If not connected, establish a connection to your ISP.
Disconnect If connected to your ISP, terminate the connection.
Clear Log Delete all data currently in the Log. This will make it easier to
read new messages.
Refresh Update the data on screen.
If using L2TP, a screen like the following example will be displayed when the "Con-
nection Details" button is clicked.
Figure 23: L2TP Status Screen
Data - L2TP Screen
Internet
Physical Ad-
dress The hardware address of this device, as seen by remote
devices on the Internet. (This is different to the hardware
address seen by devices on the local LAN.)
40