46
Learning ContinuousControllers
The MPX 100 recognizes Pitch Bend,
AfterTouch and MIDI Continuous Controllers
1-31 and 33-119. To Learn a Continuous
Controller:
1. Simultaneously press Store and Tap to
enter Learn Mode. (The Store LED flashes
slowly and the Tap LED lights steadily to
indicate Learn Mode is active.)
2. Move one of the MPX 100 front panel
controls (Mix, Effects Lvl/Bal, Adjust,
Bypass or Tap) to assign it to the control-
ler.
4. Press Store to commit to the assignment.
The Store LED will flash rapidly.
NOTE: When a MIDI controller is assigned to
Bypass or Tap, moving it through the mid-point
of its Learned range will execute a “press” o f
the front panel button.
5. To assign another front panel control to a
MIDI controller, repeat steps 2 - 5.
6. Simultaneously press Store and Tap to
exit. The Store LED will flash rapidly if
you have created or changed any assign-
ments.
3. Move the MIDI controller through its full
range. To use only a fraction of the
controller’s range, limit your movement to
the desired range.
The Edit LED will flash to indicate incom-
ing MIDI activity.