Too many trays attached [58]
1Turn off the printer.
2Unplug the power cord from the electrical outlet.
3Remove the extra trays.
4Connect the power cord to a properly grounded electrical outlet.
5Turn the printer back on.
Unformatted flash detected [53]
Try one or more of the following:
From the printer control, select Continue to stop the defragmentation and continue printing. For nontouchscreen
printer models, press to confirm.
Format the flash memory.
Note: If the error message remains, then the flash memory may be defective and need to be replaced.
Waste toner bottle nearly full [82.xy]
You may need to order a waste toner bottle. If necessary, select Conti nue on the printer control panel to clear the
message and continue printing. For nontouchscreen printer models, press to confirm.
Weblink server not set up. Contact system administrator.
From the printer control panel, press to clear the message.
Note: If the message appears again, then contact your system suppor t person.
Troubleshooting 164