Warning—Potential Damage: Do not touch the USB cable, any wireless network adapter, or the printer in the area
shown while actively printing. A loss of data or a malfunction can occur.
1
2
4
3
Use the To
1USB printer port Connect the printer to a computer.
2Ethernet port Connect the printer to a network.
3USB port Attach an optional wireless network adapter.
4Printer power cord socket Connect the printer to a properly grounded electrical outlet.
Networking
Notes:
Purchase a MarkNetTM N8352 wireless network adapter first before setting up the printer on a wireless network.
For information on installing the wireless network adapter, see the instruction sheet that ca me with the
adapter.
A Service Set Identifier (SSID) is a name assigned to a wireless network. Wired Equivalent Privacy (WEP), Wi-Fi
Protected Access (WPA), WPA2, and 802.1X - RADIUS ar e types of security used on a network.

Preparing to set up the printer on an Ethernet network

To configure your printer to connect to an Ethernet network, organize the follo wing information before you begin:
Note: If your network automatically assigns IP addresses to computer s and printers, continue on to installing the
printer.
A valid, unique IP address for the printer to use on the networ k
The network gateway
The network mask
A nickname for the printer (optional)
Note: A printer nickname can make it easier for you to identify your printer on the network. You can choos e to
use the default printer nickname, or assign a name that is easier fo r you to remember.
Additional printer setup 27