Lexmark Laser Printers manual Lexmark

•If zone coating of the adhesive is not possible, a 3 mm (0.125 in.) strip should be removed on the leading and driver edge, and a non-oozing adhesive should be used.

•Remove a 3 mm (0.125 in.) strip from the leading edge to prevent labels from peeling inside the printer.

•Portrait orientation is preferred, especially when printing bar codes.

•Do not use labels that have exposed adhesive.

•Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged.

•Do not load a sheet of labels through the machine more than once.

•Load labels into the manual bypass feeder with the recommended print side face up and the top edge going in first.

When printing on card stock:

•Set the Paper Type to Card Stock from the printer driver.

•Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces semi-liquid and volatile components into the printer.

•Do not use card stock that is creased. It may cause paper jams.

•We recommend the use of grain short card stock.

•Load card stock into the manual bypass feeder with the recommended print side face up and the top edge going in first.

Lexmark X215

29