Appendix | 19 |
Exporting and importing configuration files
Note: When you export a configuration file for this application, any bar code templates created with Bar Code Discovery will be included in the file. This applies to bar code templates associated with a destination.
Exporting and importing a configuration using the Embedded Web Server
You can export configuration settings into a text file, and then import it to apply the settings to other devices.
1From the Embedded Web Server, click Settings > Apps > Apps Management.
2From the list of installed applications, click the name of the application you want to configure.
3Click Configure, and then do one of the following:
•To export a configuration to a file, click Export, and then follow the instructions on the computer screen to save the configuration file.
Notes:
–If a JVM Out of Memory error occurs, then repeat the export process until the configuration file is saved.
–When you export a configuration file, the password specified in the Authentication Options section will be excluded.
•To import a configuration from a file, click Import, and then browse to the saved configuration file that was exported from a previously configured device.
Notes:
–Before importing the configuration file, you can choose to preview it first.
–When you import a configuration file with a static user name and password authentication, you must first reconfigure the password to be able to use the authentication credentials for the destination. For more information, see
–If a timeout occurs and a blank screen appears, then refresh the Web browser, and then click Apply.
Checking which version of the Embedded Solutions Framework is installed on a scanner
1Obtain the scanner IP address:
•From the scanner home screen
•From the TCP/IP section in the Network/Ports menu
•By printing a network setup page or menu settings page, and then finding the TCP/IP section
Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
2Open a Web browser, and then type the scanner IP address in the address field.
3From the Embedded Web Server, click Reports > Device Settings.
4Scroll down until you see “Embedded Solutions” (usually found near the bottom).
5In the Embedded Solutions section, note the value next to “Framework =”. This signifies the installed version.