Lexmark Pro900 manual Using the printer control panel

Models: Pro900

1 45
Download 45 pages 38.29 Kb
Page 9
Image 9

1

2

3

4

5

6

7

8

Use the

Scanner unit

Printhead

Ethernet port

USB port

LINE Port

EXT Port

Power supply with port

Duplex unit

To

Access the ink cartridges and printhead.

Remove paper jams.

Install, replace, or remove ink cartridges.

Connect your printer to a computer, a local network, an external DSL, or a cable modem.

Connect the printer to a computer using a USB cable.

Warning—Potential Damage: Do not touch the USB port except when plugging in or removing a USB cable or installation cable.

Connect the printer to an active telephone line (through a standard wall jack, DSL filter, or VoIP adapter) to send and receive faxes.

Connect additional devices (telephone or answering machine) to the printer and the telephone line. Use this port if you do not have a dedicated fax line for the printer, and if this connection method is supported in your country or region.

Note: Remove the plug to access the port.

Connect the printer to a power source.

Print on both sides of a sheet of paper.

Remove paper jams.

Using the printer control panel

The following diagrams explain the sections of the printer control panel:

Note: The icons are displayed when they are selectable on the current screen. If an icon is not displayed, then the function is not available.

About your printer

9

Page 9
Image 9
Lexmark Pro900 manual Using the printer control panel