Scanning

ADF

Use the ADF for multiple-page documents.

Note: The ADF is available only on selected models. If you purchased a printer without an ADF, then load original documents or photos on the scanner glass.

Scanner glass

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

Tips for scanning

When using an ADF, adjust the paper guide on the ADF to the width of the original document.

When using the scanner glass, close the top cover to avoid dark edges on the scanned image.

Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.

Scanning to a local or network computer

1Load an original document faceup into the ADF or facedown on the scanner glass.

2From the printer control panel, press .

3Press the left or right arrow button to scroll to USB or the name of the network computer, and then press . The local or network computer is the destination that will receive the scan.

Notes:

You may be prompted to enter a PIN if the computer requires it. Enter the PIN using the keypad.

To assign a computer name and a PIN to the computer, see the Help for the printer software associated with your operating system.

4Wait until the printer has finished downloading a list of the scan applications available on the selected computer.

5Press the left or right arrow button to select an application, and then press .

Scanning

27

Page 27
Image 27
Lexmark S505, S508 manual Scan ning, Tips for scanning, Scanning to a local or network computer