Lexmark S600 Series manual Using the printer wirelessly, Using the printer locally USB

Switching between USB and wireless connections (Macintosh only)

You can change the way you access your printer depending on your needs. The procedures below assume that you have configured your printer for one type of connection. See related topics on troubleshooting specific connection types if you encounter difficulties during configuration.

Using the printer wirelessly

Using the printer wirelessly

1Click or Start.

2Click All Programs or Programs, and then select the printer program folder from the list.

3Select Printer Home.

4Click the Settings tab.

5Click the Wireless setup utility link.

6Follow the instructions on the computer screen to set up the printer wirelessly.

Note: There is no need to remove the USB cable connecting the printer to the computer during wireless configuration.

Using the printer locally (USB)

1Attach a USB cable to the computer and to the printer.

2Wait a moment for Windows to locate the driver and finish setting up the printer.

Note: You can continue to use the printer wirelessly.

If the printer is currently set up locally (using USB connection)

1 Close all open software applications.

2 Insert the installation software CD.

If the installation dialog does not appear after a minute, then click the CD icon on the desktop.

3Double-click the Lexmark Extras folder.

4Double-clickLexmark Setup Assistant.

5Follow the instructions on the computer screen for configuring the printer wirelessly.

Note: There is no need to remove the USB cable connecting the printer to the computer during wireless configuration.

Using the printer locally (USB)

If the printer is currently set up for wireless

1Attach one end of a USB cable to the USB port on the back of the printer. Attach the other end to a USB port on the computer.

2Add the printer:

Networking

80