Lexmark Z65
Lexmark Z65n
Printer overview |
Basic printing |
Printing ideas |
Maintenance |
Troubleshooting |
Notices |
Index |
Using this |
Guide... |
Printing ideas 62
Printing a banner
Note: Some software applications and some operating systems do not support banner printing.
Step 1: Load the banner paper
Make sure your banner paper is not used or damaged.
1Remove any paper from paper tray 1.
2Tear off enough pages for the banner including one extra sheet, and then place them behind the printer.
3Load the unattached, leading edge of the
first page into the printer with the right side against paper tray 1.
Note: Forcing the paper too far into the printer may cause a paper jam. For help, see Clearing
paper misfeeds or jams.
4 Squeeze and slide the paper guide to the left edge of the banner paper.
www.lexmark.com