Daft 2000/12/04
Setting Originals
19
2
-
--
-How to set A4, B4, A3, Lt, LG
and DLT size originals
Note
When you set originals on the ADF
as shown in the above illustration,
the Stamp Name will be printed on
the receiver's printings as follow-
ing position:
*1 On the upper end of printings
*2 On the left end of printings
-
--
-How to set A4, A5 and B5 size
originals
Limitation
A5 size documents are not detect-
ed the exposure glass. Load A5
size documents in the ADF.
Note
When you set originals on the ADF
as shown in the above illustration,
the Stamp Name will be printed on
the receiver's printings as follow-
ing position:
*1 On the upper end of printings
*2 On the left end of printings

Setting a Single Original on

the Exposure Glass

Set originals that cannot be placed in
the Document Feeder (ADF), such as
a book, on the exposure glass one
page at a time.
ALift the Document Feeder (ADF)
by at least 30 degrees. Place the
original face down and align its
upper left corner with the refer-
ence mark at the upper left corner
of the exposure glass.
1. Reference mark
2. Scale
Note
If you do not raise the Docu-
ment Feeder (ADF) by at least
30 degrees, the original size will
not be detected.
Original
*1
*2
Where original is set
Exposure glass Document Feeder(ADF)
Original
*2
*1
Where original is set
Exposure glass Document Feeder(ADF)