Daft 2000/12/04

Troubleshooting

78
4
When the {Facsimile} key is Lit in Red

If this key is lit, refer to the table below and take the appropriate action.

Problem Solution
Paper has run out. Add paper.
⇒ "Loading Paper" in the Copy Reference.
The paper output tray is full. Remove the paper from the tray.
The machine is in RDS (Remote Diagnostic
System) mode.
Wait with the Main Power switch on. Machine
will go to the standby mode after it exits from
the RDS mode.
A facsimile error has occurred. The facsimile has a problem. Contact a service
representative. The copier will still function
normally.
Toner is empty. Replace the toner cartridge. ⇒ "Adding Toner"
in the Copy Reference.