Daft 2000/12/04
Memory Transmission
27
2
AMake sure that the Memory
Transmission is selected.
If it is not, press the [Memory TX]
key.
BSet the original.
Limitation
❒ You can send the first pages
from the exposure glass then
the remaining pages from the
Document Feeder (ADF). After
you remove the last page from
the exposure glass, you have 60
seconds to insert the remaining
pages in the Document Feeder
(ADF).
❒ Note that you cannot set pages
on the exposure glass after you
have started using the Docu-
ment Feeder (ADF).
Note
❒To store multiple page originals
from the exposure glass, set
them page by page.
❒The original can be placed at ei-
ther Document Feeder (ADF) or
Exposure Glass, until you press
the {Start} key.
Reference
P.18 “Setting Originals”
CMake the necessary settings you
require.
Reference
⇒ P.38 “Scan Settings”
DDial.
If you make a mistake, press the
{Clear/Stop} key and enter the cor-
rect number again.
Reference
⇒ P.43 “Dialing”
⇒ Chapter 4, " Dial" and "Redi-
al" in the Advanced Features
manual.
EPress the {
{{
{Start}
}}
} key.