Daft 2000/12/04
Faxing
24
2

If the Machine Cannot Detect the Size of Your Original

If the machine cannot detect the original size, the following display is shown:
If this happens, carry out the following steps.
APress [Exit].
BRemove the original and replace it on the exposure glass.
CPress the {
{{
{Start}
}}
} key to scan the original again.
If the above display appears again, repeat steps A to C.
Note
If the machine still cannot detect the original size, the following display is
shown:
If this happens, carry out the following steps.
Press the key to switch the scan size.
•Press the {Start} key again.

Original Sizes Difficult to Detect

The machine finds it difficult to detect the size of the following kinds of origi-
nals. If this happens, the receiving machine may not select print paper of the cor-
rect size. P.24 “If the Machine Cannot Detect the Size of Your Original”.
Documents set on the exposure glass of sizes other than those listed in the ta-
ble below
Originals with index tabs, tags, or projecting parts