Daft 2000/12/04
Scan Settings

41

2
Note
❒If [Auto Image Density] is not
selected, press [Auto Image
Density].

Manual Image Density

AMake sure that [Auto Image Den-
sity] is not selected. If it is se-
lected, press [Auto Image Density]
to turn it off.
BPress [Lighter] or [Darker] to
change the density.
Note
❒You can select one of seven
density levels.

Combined Auto and Manual

Image Density

AMake sure that [Auto Image Den-
sity] is selected. If it is not se-
lected, press [Auto Image Density]
to turn it on.
BPress [Lighter] or [Darker] to
change the density.
Note
❒You can select one of seven
density levels.
Mixing Scan Settings for a Multiple Page Original
When sending an original consisting
of several pages, you can select differ-
ent Image Density, Resolution and
Original Mode settings for each page.
Set your original, select the scan set-
tings for the first page, dial and press
the {Start} key as you would normal-
ly. Then follow one of the following
two procedures.