WATCHING TV
TURNING ON TV
WATCHING TV
1First, connect power cord correctly.
At this moment, the TV switches to standby mode.
■In standby mode to turn TV on, press the 
, INPUT, (DE or 
) button on the TV or press the POWER, INPUT, CH( 
or 
), Number (0~9) button on the remote control.
2Select the viewing source by using the INPUT button on the remote control.
■ This TV is programmed to remember which power state it was last set to, even if the power cord is out.
3When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
!NOTE G If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
CHANNEL SETUP
Auto Scan (Auto Tuning)
Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list.
Run Auto Tuning again after any Antenna/Cable connection changes.
CHANNEL | Move Enter |
Auto Tuning
Manual Tuning
Channel Edit
CHANNEL | Move Enter |
Auto Tuning
Manual Tuning
Channel Edit
Press ‘Yes’ button to begin auto tuning.
Yes
No
1MENU
Select CHANNEL.
2
ENTER | Select Auto Tuning. |
|
3
ENTER | Select Yes. |
|
4
ENTER | Run Auto | tuning. |
5
RETURN
Return to the previous menu.
MENU
Return to TV viewing.
■A password is required to gain access to Auto Tuning menu if the Lock System is turned on.
26
