●aria 186/ 100/ 34E - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
19
On LKD-2N/S, 8D/S,
●Conference feature can be accomplished by programming
a flexible key as CONF button (TRANS + 91).
To prevent unauthorized outside calling, DISA access or Trunk access on your station by others,
the system provides a means to lock/unlock a station by access authorization code.
Button Procedures
To register access authorization code,
●Press TRANS/PGM button and dial 4 4
●Dial your own 5 digits access authorization code.
●Press HOLD/SAVEbutton.
●Confirmation tone is heard.
Access Authorization Code System Features
Procedures
●Press TRANS/PGM button and dial 4 6
●Press HOLD/SAVEbutton. (Confirmation tone is heard.)
●MUTE button will flash until restored to normal.
Note : An access authorization code should be registered.
Blocking Outside Calls Button Range
Restoring Outside Calls Button Procedures
●Press TRANS/PGM button and dial 4 7
●Dial your current access authorization code.
(Confirmation tone is heard.)
●MUTE button will be extinguished.
Range
Procedures
●Press SPEED button twice.
●On the display, you will see:
Range
DIAL BY NAME
ICM : 1 U_SPD : 2 S_SPD : 3
●Select desired type.
1 : Intercom
2 : User (Station Speed Dial)
3 : System (System Speed Dial)
●Confirmation tone is heard and you will see (above):
1 : XXXX XXXX XXXXXX
2 : YYYY YYYY YYYYYY
Each station and speed dial number can be assigned to a name. When names are programmed,
you may select a speed dial number by the stored name.
Button
Using Dial By Name ●Press theVOLU ME button to see the next two names.
●You may enter characters using the code in “Storing Dial by
Name”. The LCD will display the first two names which match
your input.
●To select the name in line 1, press HOLD/SAVEbutton.
●To select the name in line 2, dial 2 and press HOLD/SAVE
button.
●The call is placed automatically.