●aria 186/ 100/ 34E - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
24
CO Message Wait (CLI Message Wait)Button Procedures Range
When a call is received with DISA/DID, the Calling Line Identification (CLI) of the incoming call is
displayed on the LCD of the station. If the DISA/DID external party hangs up the call before
answered, the CLI will be stored in the CO message wait queue in the called party.
To retrieve CLI Message,
●Press CALLBKbutton.
●The stored message will be shown on the LCD.
To delete the current CLI message and see the next one,
●Press CONFbutton.
To make a callback,
●Press HOLD/SAVEbutton.
●The stored number is dialed as speed dialing.
To see the next/previous CLI message,
●Press VOLUME button.
To delete all CLI messages,
●Press SPEED button twice.
●If DVU message is stored with CLI message, the CLI message
will not be deleted by pressing SPEED button.
DISA (Direct Inward System Access)●Dial the CO access code after hearing dial tone or voice guide
from DVU.
●Or, dial the CO access code after dialing the programmed
authorization code (when needed) for outgoing call.
Button Procedures
Outside caller can access a CO line which is programmed as DISA line.
Range
LCD Language Change Button Procedures Range
●Press TRANS/PGM button and dial 5 1
●The language in LCD is changed into default value.
●If pressing TRANS/PGM + 5 1, the language
in the LCD is changed to the nation’s language.
System Features
Button Procedures
Alarm ResetRange
To terminate alarm signal while idle state,
●Dial * 5 6 5.
●Confirmation tone is heard and the alarm signal is terminated
at all assigned stations.