LG Electronics 3 manual How to Install Your microSDTM Card, Battery Charge Level, Signal Strength

How to Install Your microSDTM Card

NOTE

A memory card is sold separately.

1.Locate the microSDTM slot on the right side of the phone and gently uncover the slot opening.

(microSD™ slot cover stays attached to the phone so you don't lose it).

2.Insert the microSDTM card in the correct direction until it clicks into the slot. If you insert the card in the wrong direction, it may damage your phone or your card.

How to Remove Your microSDTM Card

Gently press and release the exposed edge of the microSDTM card, then remove it from the slot and replace the cover.

NOTES
●	Do not attempt to remove the microSDTM
●	card while reading or writing to the card.
	Users wishing to transfer or download music
	onto a MicroSD™ card inserted into this
	phone (through either MTP Sync or Over the
	Air) should format the MicroSD™ card on
	this handset before using it through(Menu ->

Settings & Tools -> Memory -> Card Memory -> Options -> Format). Warning: Formatting the MicroSD™ card will erase all contents on the card. In the event the MicroSD™ card is used on this phone without first formatting it,the phone will display a “License acquisition failed” during OTA downloading or MTP Sync. Song files downloaded or otherwise purchased from third party providers and stored on a MicroSD™ card inserted into this device may be protected or encrypted by such provider and cannot be played on this device.

Battery Charge Level

You can find the battery charge

level at the top right of the LCD screen. When the charge level becomes low, the battery sensor sounds a warning tone, blinks the battery icon, and displays a warning message. As the charge level approaches empty, the phone automatically switches off without saving.

Signal Strength

Call quality depends on the signal strength in your area. You can tell how much signal strength you have by the number of bars next to the

signal strength icon: the more bars, the stronger the signal. If you’re having problems with signal quality, move to an open area or, when inside a building, try moving near a window.

19