LG Electronics 42LD450C 47LD450C 32LD520 42LD520, 42LE530C 47LE530C 55LE530C STAND INSTRUCTIONS

PREPARATION
10
INSTALLATION DETACHMENT
ᯫ
Image shown may differ from your TV.
!
NOTE
When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
1Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2Assemble the parts of the STAND BODY
with the STAND BASE of the TV. At this
time, tighten the screws that hold the
STAND BODY on.
3Assemble the TV as shown.
4Assemble the part of the STAND REAR
COVER with the TV.
5Install the 4 screws into the holes shown.
1Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2Remove the screws that hold the stand on.
3Detach the STAND REAR COVER from TV.
4Detach the stand from TV.
STAND INSTRUCTIONS
(For 26/32/37/42/47/55LE5300, 26LE5500, 42/47/55LE530C, 42/47/55LE530C)
STAND BASE
STAND BODY
STAND REAR
COVER
M4 x 16
M4 x 14
26LE5300,
26LE5500
Other models
M4 x 22 (32LE5300)
M4 x 24 (37/42LE5300, 42LE530C)
M4 x 26 (47/55LE5300, 47/55LE530C)
M4 x 20
26LE5300,
26LE5500
or
Tighten the t wo of these four
screws and the two Torx plus
star head screws (provided as
parts of the TV) to secure the TV. Tighten
the two Torx plus star head screws with a
star head driver bit (not provided as parts
of the TV).
x 2 x 2
(For 42/47/55LE530C)
Downloaded From TV-Manual.com Manuals