PREPARATION
STAND INSTRUCTIONS
(For 32/42/47LD420, 32/42/47/55LD520, 55LD520C)
ᯫImage shown may differ from your TV.
INSTALLATION
1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
2(For 55LD520C)
Assemble the parts of the STAND BODY with the STAND BASE of the TV.
3Assemble the TV as shown.
4Install the 4 screws into the holes shown.
STAND BODY
M4 x 14
STAND BASE
M4 x 24 |
For 55LD520C
!NOTE
When assembling the desk type stand, make sure the screws are fully tightened (If not tightened fully, the TV can tilt forward after the product installation). Do not over tighten.
x 4
Tighten the stand with the four screws (provided as parts of the TV).
or
Tighten the two of these four
x 2 
x 2 screws and the two Torx plus star head screws (provided as parts of the TV) to secure the TV. Tighten
the two Torx plus star head screws with a star head driver bit (not provided as parts of the TV).
14
Downloaded From
