How To Assemble
CAUTION: Assemble the cleaner completely before plugging into an electrical outlet.
CAUTION: Moving parts, stay clear of brush roll when plugging in.
NOTE: Features may vary by model yet all parts assemble the same.
Step A Remove Bag Cover
Bag
Cover
Latch
Bag Cover
Handle
Two Screw Locations
Bag Cover
1.Remove bag cover from unit to expose the two screw installation locations. Release the bag cover by rotating the bag cover latch to the left. Pull out and up on the bag cover handle to remove bag cover from unit.
Step B Attach Handle
Handle
Tabs
Slots
Screw | Screw |
2.Position handle as above. Slide the handle down over the top of the unit, inserting handle tabs into slots on unit.
3.Find the two screws in the accessory bag included in the carton. To secure the handle on the unit, install the two screws.
5